RabbitLink EG2110 User Manual - page 44
Manual is about: Network Programming Gateway
of
50
40
RabbitLink (EG2110)
ConsoleFinish
int ConsoleFinish(long timeout);
This function finishes receiving data from the RabbitLink serial console by blocking for
an optional amount of time to do it. If the timeout is set to 0, the function will not receive
any data, but will poll to determine whether there are more data to receive.
PARAMETERS
timeout
The length of time to time out, in milliseconds, and is 0 for
ConsoleFinish()
to determine whether there are more data to
receive.
RETURN VALUE
0 if there are more data on the serial console and non-zero if all the data have been re-
ceived.
LIBRARY
STDIO.LIB