RADVision Scopia XT1000 User Manual - page 16
Other manuals for Scopia XT1000:
Administrator's Manual, Administrator's Manual, Quick Setup Manual, User Manual
of
70
RADVISION | User Guide
System Installation
| 16
Step 9
Switch the monitor on.
Step 10
Press the Power button on the back of the Codec Unit. The system status LED
on the front means:
LED on:
System is on and normally operating.
LED flashing: System power is on, but the system is in standby mode.
LED off:
System power is either off or not connected.
Step 11
Wait for the main user interface to appear.
Figure 1. System Cabling Diagram