RADVision Scopia XT1000 User Manual - page 27
RADVISION | User Guide
First Time Equipment is Switched On
| 27
TWO Monitors Configuration
When not connected, you’ll see the local camera image on the auxiliary monitor, and the
GUI overlapped to the local image on the main monitor; once in connection, you’ll see the
remote image on the main monitor, and the local image on the auxiliary monitor.
Note:
The main monitor is connected to HD1. The auxiliary monitor is connected to
HD2.
If the remote sends you a presentation, you’ll see it on the main monitor, and the remote
image on the auxiliary monitor.
Product Registration
Step 1
Open the envelope that came with the SCOPIA XT1000.
Step 2
Locate the serial number and product key.
Step 3
On a computer, open a browser and navigate to
http://www.radvision.com/XT1000.
Step 4
Complete the online registration form and enter the serial number and product
key. The web registration form returns a license key.
Step 5
Write down the license key and keep it in a safe place for future use.
Quick Setup
A quick setup wizard will assist you in this first approach to the system.
The quick setup will show more pages, allowing user to set some useful parameters for basic
system management.