RADVision Scopia XT1000 User Manual - page 31
Other manuals for Scopia XT1000:
Administrator's Manual, Administrator's Manual, Quick Setup Manual, User Manual
of
70
RADVISION | User Guide
First Time Equipment is Switched On
| 31
Moving the Camera
Step 1
On the general screen, navigate
to Cameras using the arrow keys.
Step 2
Select Move camera.
Step 3
Use the arrow keys to move the
camera to the preferred
position.
Step 4
Select Stop moving camera.
Step 5
Repeat the procedure if you have an optional second camera installed.