Rangemaster CLASSIC 110 GAS FSD User Manual - page 12

12

Oven shelves

the shelf guard should be at the back pointing upwards

The oven shelves can be easily removed and refitted.

Pull the shelf forward 

until the back of the shelf 

is stopped by the shelf 

stop bumps in the oven 

sides.

Lift up the front of the 

shelf so the back of the 

shelf will pass under the 

shelf stop and then pull 

the shelf forward.

To refit the shelf, line up the shelf with a groove in the 

oven side and push the shelf back until the ends hit 

the shelf stop. Lift up the front so the shelf ends clear 

the shelf stops, and then lower the front so that the 

shelf is level and push it fully back.

The Handyrack

The maximum weight that can be held by the 

Handyrack is 5.5kg (12lb). It should only be used 

with the supplied meat tin, which is designed to fit the 

Handyrack. Any other vessel could be unstable.

The Handyrack fits to the left hand oven door only. 

Food cooking on it is easy to attend to, because it’s 

accessible when the door is open. It can be fitted at 

two different heights. One of the oven shelves must 

be removed and the other positioned to suit.

When the Handyrack is used in its highest position, 

other dishes can be cooked on the bottom shelf 

position of the oven or standing on the base of the 

oven

When the Handyrack is used in its lowest position, 

other dishes can be cooked on the second shelf 

position of the oven.

To fit the Handyrack, 

locate one side of it on 

the door bracket.

Then spring the other 

side out to clip it onto 

the other bracket.