Rangemaster CLASSIC 110 GAS FSD User Manual - page 19

19

Dear  Installer

Before you start your installation, please complete the details BELOW.

If your customer has a problem relating to your installation they will be able to contact you easily.

Thank you

Installer’s Name

Installer’s Company

Installer’s Telephone number

You  will  need  the  following  equipment  to  complete  the  cooker 

installation  satisfactorily

STABILITY  BRACKET

If the cooker is to be 

supplied with gas through 

a flexible hose, a stability 

bracket or chain must be 

fitted.

These are not supplied 

by with the cooker but are 

available at most builders 

merchants.

GAS  PRESSURE  TESTER

It is important the gas 

pressure is set correctly

FLEXIBLE  GAS  HOSE 

IMPORTANT

Flexible hose must be 

suitable for 70°C rise when 

the supply connection is 

above 610mm from the 

floor.For LPG, a suitable 

hose for the gas type and 

pressure must be used.

A hose is not supplied 

with the cooker.

MULTIMETER

(for electrical checks)

Make sure the installation 

is electrically safe.

You  will  also  need  the  following  tools:

1.  Electric  drill

2.  Masonry  drill  bit  &  Rawlplugs

(only required if fitting the cooker on a stone 

or concrete floor)

3.  Steel  tape  measure

4.  Cross  head  screwdriver

5.  Flat  head  screwdriver

6.  Spirit  level

7.  Pencil

8.  Adjustable  spanner

9.  Screws  for  fitting  stability  bracket