Summary of ST70 Instrument

  • Page 1

    St70 pilot operating guide www.Raymarine.Com raymarine uk ltd, anchorage park, portsmouth, hampshire po3 5td, united kingdom tel: +44 (0) 23 9269 3611, fax:+44 (0) 23 9269 4642 raymarine inc ,21 manchester street, merrimack, new hampshire 03054, usa tel: +1 603.881.5200, fax: +1 603.864.4756 part nu...

  • Page 2

    Copyright raymarine 2008 emc conformance all raymarine equipment and accessories are designed to the best industry standards for use in the recreational marine environment. The design and manufacture of raymarine equipment and accessories assures compliance with the appropriate electromagnetic compa...

  • Page 3

    St70 pilot - getting started switch on/off & introduction switching on your st70 pilot to switch on your st70 pilot, hold down for 1 second. The pilot powers up and shows the page that was displayed when the power was last switched off. Note: if power to a system to which st70 pilot or instrument is...

  • Page 4

    Resolving problems in the unlikely event that you experience problems using your st70 pilot, refer to the trouble- shooting procedures in the st70 autopilot controller user reference guide. If you need further assistance, please visit the customer support area of our web site at: www.Raymarine.Com a...

  • Page 5: 225

    Use these instructions to select the pilot view you want. Selecting a view displaying the pilot views 1. With any operational page displayed, press and hold menu to display heading view. 2. Press and hold menu again to display 2d - compass rose view. 3. Press and hold menu again to display 3d - isom...

  • Page 6

    St70 pilot - selecting the view selecting the pilot view 2 card continued.

  • Page 7

    Selecting a pattern different patterns are available depending on whether the system is set up for power boat or fishing boat. There are no sailboat patterns. 1. Go to main menu with any operational page displayed, press menu to display the main menu, then use or > to scroll to the patterns option. ...

  • Page 8

    St70 pilot - patterns selecting a pattern spiral direction (port or starboard) radius radius increment on heading radius on heading increment circle against heading direction (port or starboard) and distance figure of eight direction (port or starboard) and radius pattern search direction (port or s...

  • Page 9

    The dodge feature allows you to leave your current mode and go to standby in order to tem- porarily change course. Once you have changed course you have the choice of continuing on the new course or returning to your previous heading. If your st70 pilot is not connected to a compatible course comput...

  • Page 10

    St70 pilot - using dodge using the dodge feature 4 card continued.

  • Page 11

    The track mode feature enables you to instruct the pilot to steer to a series of waypoints, comprising of a route generated by a chartplotter. Using track start with the smartpilot in auto mode and your chartplotter following a route. 1. Press track to enter track mode. 2. Wait for the warning to so...

  • Page 12

    St70 pilot – using special features using the track feature 5 card continued.

  • Page 13

    When the smartpilot is in wind vane mode it uses the wind angle as the primary heading ref- erence. As changes in the true or apparent wind angle occur, it adjusts the locked heading to maintain the original wind angle. Selecting wind vane mode you can select wind vane mode from either standby or au...

  • Page 14

    St70 pilot – using special features using wind vane mode 6 card continued.

  • Page 15

    You can change the brightness of the screen, and the color scheme to use. Brightness use these instructions to set the screen brightness to the level you want. Quick set up to quickly change the screen brightness: a. Press and release to display the brightness adjust popup. B. Use or > to set the re...

  • Page 16

    Choosing colors use these instructions to set the screen colors for optimum viewing. You can choose from three daytime and three night-time settings. If you have other compatible pilots or instruments installed, these settings will be applied to them at the same. 1. Go to main menu with any operatio...

  • Page 17

    St70 pilot – setting your preferences choosing data units when an st70 pilot is connected to seatalk ng or seatalk 2 , you can use it to select the units in which data is displayed throughout the system. A range of imperial, metric and nautical units is available. Use the procedure on this card to c...

  • Page 18

    St70 instrument – setting your preferences choosing data units 6. Set the units use or > to scroll to the required units. Press enter to save your setting and return to the units summary page. Press enter to select the second units summary page. Press enter to go to the units select menu. If you wan...

  • Page 19

    If your st70 pilot is not receiving gps data, you can use this procedure to specify the local time as your system time. Set the time 1. Go to main menu press menu to display the main menu then use or > to scroll to displaysettings . Press enter to display the display settings menu. 2. Select time & ...

  • Page 20

    St70 pilot – clocks setting the correct local time 5. Set time offset press enter to display the set time offset setup box. The time offset is the difference in time between gmt (time at longitude 0°) and local time. Use or > to set the appropriate time offset for your area. Press enter to accept th...

  • Page 21

    St70 pilot – alarms alarm events alarm indications a range of alarm functions are available, to alert you to particular events. When an alarm occurs, a popup box is displayed and an audible alarm indication may sound. The popup identifies the reason for the alarm. If an alarm occurs to silence the a...

  • Page 22

    Rate gyro fault safety alarm. Current limit safety alarm. Rudder feedback unit fault safety alarm. Autolearn fail 1 (not carried out) safety alarm. Autolearn fail 2 (manual inter- vention) safety alarm. Autolearn fail 3 (compass or drive error) safety alarm. Autolearn fail 4 safety alarm. Autolearn ...