Safescan TA-900 series Manual - page 28
28
English
| nEdErlAnds | dEuTsch | FrAnçAis | EspAñol | iTAliAno | porTuguês
scroll with
▼to the input field for the password (Pass.) and enter the
password of the wireless router using the T9 input method editor
(IME) (see Chapter 16 for more on the T9 input method
editor).
set the ip Address to dhcp and complete the setting with OK (M-)
press to return to the previous menu.
For manual settings, see the chapter 6.4.1 Manual WiFi configuration.
Note:
The password must be the same as that of the wireless router so that
the TA 900 can gain access to the WLAN.
on the check/clock-in screen the following image
is displayed when the device is connected to the Wireless lAn.
6.4.1 Manual Wireless Configuration
click to Refresh the screen, the available WlAns
will then be listed on the interface with an indication of the signal
strengthen
select the required Wireless lAn and enter with .
start at the check/clock-in screen, press the Menu key
button and then press to open the Main Menu.
From the Main Menu, select Comm. to configure communication
settings and press to enter.