Safescan TA-900 series Manual - page 45
45
English
| nEdErlAnds | dEuTsch | FrAnçAis | EspAñol | iTAliAno | porTuguês
10.2 Audio Test
This option allows you to test if all the safescan TA-900 series.
check the messages for accuracy, clarity and pronunciation.
To exit the Audio Test screen and return to the Auto Test Menu, press oK repeatedly or press Esc at any time.
10.3 Keypad Test
The safescan TA-900 series allows you to test that each key on its keypad is responding properly.
you will notice the screen displays the keys for every corresponding key on the safescan TA-900 series keypad.
As you touch each “keypad key,” its corresponding key on the screen display will highlight in red (__).
if the key is not properly working it will highlight in gray/black (__).
To exit the Keyboard Test screen and return to the Auto Test Menu, press oK or press Esc at any time.
10.4 Fingerprint Sensor Test
The Fingerprint sensor Test verifies if the sensor is working correctly. you can visually examine the image resolution
and clarity of scanned fingerprints in real-time.
place finger(s) repeatedly on the sensor and observe the recorded images.
if images are acceptable, press the Esc key at any time to return to the Auto test Menu.
start at the Auto test Menu.
Then scroll with the
▲/ ▼keys until Audio Test is highlighted.
press oK to accept.
start at the Auto test Menu.
Then scroll with the
▲/ ▼keys until Keyboard Test is highlighted.
press oK to accept.
start at the Auto test Menu.
Then scroll with the
▲/ ▼keys until sensor Test is highlighted.
press oK to accept.