Safescan TA-900 series Manual - page 36
36
English
| nEdErlAnds | dEuTsch | FrAnçAis | EspAñol | iTAliAno | porTuguês
7.5 Reset
This resets the safescan TA-900 series to its factory default settings, including communication settings,
system settings, etc.
Note:
• reset does noT erase user information or attendance records.
• reset only erases changes made to the safescan TA-900 series system configuration since leaving the factory.
7.6 Bell setting
The safescan TA-900 series has an internal bell which can be scheduled to ring at certain intervals.
From within the system Menu, scroll with the
◄ / ►keys and
▲/ ▼keys until reset is highlighted.
press oK.
choose “reset all default settings”.
The safescan TA-900 series will prompt “Are you sure?”
press oK to restore the default settings.
press Esc to cancel and return to the previous menu.
From within the system Menu, scroll with the
◄ / ►keys and
▲/ ▼keys until Bell is highlighted.
press oK.
scroll with
▲/ ▼keys to view the bell settings line by line.
scroll with the * or # keys to view the bell settings page by page.
press key to turn the scheduled bell on and off.
press oK
Edit the scheduled bell.