Safescan TA-900 series Manual - page 6
6
1.0 Consideration
The safescan TA-900 series Time Attendance terminals are designed to work with safescan Time Attendance
pc-software.
1.1 Environmental Considerations
do not install or operate the safescan TA-900 series where strong light is present. intense light will adversely impact
the sensor’s ability to accurately read fingerprints.
The safescan TA-900 series operating temperature range is 0° to 40° c (32° to 105° F). do not operate the safescan
TA-900 series in very hot environments. Keep the safescan TA-900 series away from direct heat sources and provide
adequate ventilation to prevent the safescan TA-900 series from overheating.
2.0 Mounting and connecting the terminal
Mount the metal mounting bracket to a wall at a height of 1.4 - 1.5 meters.
connect the mains adapter to the bottom of the terminal.The terminal is now ready for use.
2.1 Connect the TCP/IP network cable if you want to synchronize the terminal through the network.
if there isn’t a Tcp/ip network connection available, you can read out the data
with a usB stick (pendrive) and subsequently read this in into the
safescan Time Attendant software.
Screw 3x
Security screw
USB
TYPE B
TCP/IP
DC 5V
USB
TYPE A
TA Terminal - Back
TA Terminal - Left side
English
| nEdErlAnds | dEuTsch | FrAnçAis | EspAñol | iTAliAno | porTuguês
TCP/IP
PC
Switch
TA 800
series