Safescan TA-900 series Manual - page 37
37
English
| nEdErlAnds | dEuTsch | FrAnçAis | EspAñol | iTAliAno | porTuguês
Bell Time:
indicates what time the bell will ring.
Tone:
indicates which audio file will play (.wav).
Volume:
indicates how loud the bell will sound.
Times:
indicates the number of times the Tone will repeat.
On/Off:
Turns bell on and off.
change the values by using the scroll keys and keypad.
When finished, press oK, or highlight the oK button and then press oK.
press Esc to cancel and return to the previous menu.
7.7 Miscellaneous Settings (Misc. Set.)
use Miscellaneous settings to adjust the following settings:
• sleep time
• Fingerprint image
• power Button
• language
7.7.1 Sleep time (Idle)
To help prolong the life of the safescan TA-900 series.
After selecting oK, a message will display “change saved successfully! oK”.
To continue, press oK.
press the Esc key to cancel and return to the previous menu.
From within the system Menu, scroll with the
◄ / ►keys and
▲/ ▼keys until Misc.set. is highlighted.
press oK.
Enter the “idle” minutes the safescan TA-900 series should wait
before it enters sleep Mode to conserve power.
press oK, or highlight the oK button and then press oK.