SmartSight S1000-RX 1 User Manual - page 9

3 

SmartSight

TM

 1000 User Manual / Rev 0.33 

2.2 Applications 

The current software version of the S1000 supports operation in point-to-point.  

Future software upgrades will support transmission of video to multiple receivers as 

well as retransmission of signal in none-line-of-sight application.    

The S1000 supports 3 non-overlapping channels (channels 1, 6 and 11) or 

operation of 3 simultaneous links within the same location.  It is also possible to 

support up to 6 links simultaneously with each of the six receivers installed at the 

same location.  However, this requires some site planning (see CHAPTER 4).     

In most case, you will need to program a unique SSID (security ID) for each radio 

system (see 4.2.4 to learn how to configure each module using a computer).  As an 

example, for 3 S1000 systems, 3 individual SSID are required.  The table below 

shows the configuration applied to each module: 

Module 

Configured Channel 

Configured SSID 

S1000-TX 1 

1 

SYSTEMA 

S1000-RX 1 

1 

SYSTEMA 

S1000-TX 2 

6 

SYSTEMB 

S1000-RX 2 

6 

SYSTEMB 

S1000-TX 3 

11 

SYSTEMC 

S1000-RX 3 

11 

SYSTEMC