SVS-Vistek evo1050 Operation Manual - page 24
4 Software Control | 17
click on “Next”
How to install ConvCam
(make sure “DotNet” is installed or install it)
The installation files for
64 bit applications are in the zipped folder
“ConvCam4Setup64Vx.x”,
the files for 32 bit applications are in
“ConvCam4Setup32Vx.x”
The 64 bit version runs only on 64 bit Windows.
The 32 bit version
is installable on 32 and 64 bit Windows. Which version is suitable
depends on your application which makes use of the ConvCam instal-
lation.
64 bit applications (grabber etc.) need the 64 bit ConvCam version,
32 bit applications (grabber etc.) need the 32 bit ConvCam version.
Both versions of “ConvCam4.exe” depend on .NET framework 4.0
which is included in the installation files and has to be installed.
Insert the Installation CD in PC’s drive.
Copy the correct bit-version (32 or 64) to the harddrive.
Unzip the file.
In the created folder will be the folder “DotNetFX40” and inside this
folder the file “DotNetFX40_Full_x86_x64.exe”. Double click to
install “DotNet”
After “DotNet” is installed then the installation of ConvCam can be
started by double clicking on the file “ConvCam4Setup.msi”.
4.2 Installation of ConvCam
PRELIMINAR
Y