SVS-Vistek evo1050 Operation Manual - page 9
1 introduction | 2
Thank you for purchasing a SVS-VISTEK camera. This camera is a
high-end electronic imaging device designed for use in Machine Vision
applications. It can be used in stationary and mobile applications.
Failure to operate the camera other than its intended use and making
modifications to the camera and its components can lead to personal
injury or property damage for which the manufacturer assumes no
liability. Ensure that the intended use and safe operation of the camera
are not interfered with, even by unforeseen external forces. Intended
use and safe operation of the camera is described in this operation manual.
Operation of the camera has to be carried out only by trained personnel
who are knowledgable of the rules for prevention of accidents and
other general security measures for electrical devices. You can protect
yourself from injury and prevent damage to the camera and other
components through operation in the intended use and following the
safety rules.
Avoid injury or damage!
Read and understand Operating Manual before
operating this camera.
MANDATORY ACTION!
if any sign of overheating is observed, discontinue
the use immediately. in the event that smoke, smell,
or any other sign of overheating is observed, turn
the power switch of the system OFF immediately and
remove the power cable(s) from the system connec-
tors, like computer, camera, lightning. Do NOT try to
continue to use the system. To do so in spite of clear
signs of malfunction invites a fire, an electric shock
hazard, or serious damage to the system compo-
nents. in such case, contact the dealer/distributor
from which you purchased the system for repair
service.
1.2 Intended Use
MANDATORY ACTION!
if any sign of malfuctioning is observed, discontinue
the use immediately. Do NOT try to use the system
when it is malfunctioning. (Ex. No images on the
monitor) in the event of malfunction, turn the power
switch of the system OFF immediately and remove
the system power cables from the system components
connectors. in such case, contact the dealer/distribu-
tor from which you purchased the system for repair
service.