Tait TP3300 User manual - Attaching The Battery

26  Before using your radio

Attaching the battery

1 Rotate the power/volume control switch 

counterclockwise to turn off the radio.

If the battery has been attached while the radio 

is turned on, turn the radio off and then on again 

before use.

2 Insert the top of the 

battery into the recess at 

the back of the chassis.

3 Lightly press the bottom 

of the battery towards 

the radio until the battery 

catch clicks.

4 Make sure that the 

battery is firmly in 

position.

Removing the battery

The battery is secured to the radio by a battery catch 

in the radio’s rear panel.

To remove the battery from the radio, so that the 

battery can be charged or replaced:

1 Rotate the power/volume control switch 

counterclockwise to turn off the radio.

If the battery has been removed while the radio 

is turned on, turn the radio off and then on again 

before use.

2 Push the PRESS button at the bottom of the radio 

to release the battery catch, and pull the battery 

away from the radio.