Tait TP3300 User manual - Attaching The Antenna
Manual is about: DMR Conventional and Analog
Portable Radios
of
73
Before using your radio 27
Attaching the antenna
Before using the radio, screw the antenna clockwise
into the antenna connector. The antenna should be
screwed sufficiently tight so that it doesn’t unscrew
easily. This is important as it creates a seal.
Removing the antenna
Warning Do not change the antenna in a hazardous
location. An explosion could cause serious injury or
death.
Use a firm grip and turn the antenna counterclockwise
half a turn. Use a lighter grip to fully unscrew the
antenna, and carefully remove it.
Removing the belt clip
1 To remove the belt clip, use a
Pozidrive screwdriver to undo
the two belt clip screws.
2 To attach the belt clip, use a
Pozidrive screwdriver to fasten
the two belt clip screws.