Tait TP3300 User manual - Led Behavior

 Charging and caring for batteries  58

LED behavior

If there is a battery in the charger when power is 

supplied to the charger, the LEDs behave as follows:

If the charger does not behave as expected:

■

Make sure the radio or battery is seated properly 

in the charger.

■

Check that the charger is properly plugged into 

the originally supplied power supply.

■

Check that the battery and charger contacts are 

clean. To clean, wipe the contacts with a dry lint-

free cloth to remove any dirt, oil or grease.

Meaning

briefly

The charger has been connected to a power 

supply.

steady

The battery is charging.

steady

Charging complete. Remove the battery, or 

leave it in the charger.

steady

■

The battery temperature is outside the nor-

mal charging range. Charging will start or 

resume once the temperature is within nor-

mal limits. No action is required by you.

■

There is a fault. Contact your dealer.

or

flashing

If the LEDs for all charger slots continuously 

flash orange, or red then orange, the charger 

itself may be faulty (e.g. the 6-way charger fan 

may be jammed). Contact your dealer. 

all off

There is a fault. Contact your dealer.