Tait TP3300 User manual - Sending An Emergency Alarm

51  Operation

No-key no-display radio

■

Press the function key programmed to send a pre-

defined quick text message to a predefined ID.

The LED flashes red.

Two chirps indicate that the message has been sent, 

or 

a low-pitched tone indicates that the message cannot 

be sent.

Sending an emergency alarm

If your radio is set to silent, it will not display any 

audio or visual indicators during Emergency 

mode.

■

Press the function key programmed for emer-

gency.

The display shows Tx Alarm and the destination 

alias. The LED blinks red and the Emergency icon 

appears.

or

The radio will send an emergency telegram. You can 

now press PTT to make an emergency call, and 

receive by releasing PTT. After a call hang time, the 

radio return to its normal working state.

or

The radio will send an emergency telegram and then 

transmit voice from the microphone for a preset time. 

And then goes back to normal working state. Then the 

radio return to its normal working state