Tait TP3300 User manual - page 51

 Operation  50

You can also press the right selectyion key to 

quit the operation.

5 Press Send.

You can also press Save to save the message 

in the drafts.

6 Select Contact List, scroll to the required contact 

and then press Select.

or

Select Manual Dial end enter the subscriber ID 

and press Confirm.

The display shows Sending Msg... and the LED 

flashes red.

If the message is sent, a tone sounds and the display 

Send Success!

or

If the message is not sent, a low tone sounds and the 

display shows Send Failed!

4-key radio

■

Press the function key programmed to open the 

Quick Text function. Go to step 2 below.

or

1 Press Menu and select Message > Quick Text.

2 Scroll to the required quick text and press Select.

3 Scroll to the required contact and press Select.

The display shows Sending Msg... and the LED 

flashes red.

If the message is sent, a tone sounds and the display 

Send Success!

or

If the message is not sent, a low tone sounds and the 

display shows Send Failed!