Tait TP3300 User manual - Attaching An Audio Accessory

28  Before using your radio

Attaching an audio accessory

Audio accessories plug into the radio’s accessory 

connector. The accessory connector is protected by a 

cover, which needs to be removed before an 

accessory can be installed.

Notice  The accessory cover protects the accessory 

connector from electrostatic discharge. Keep the 

cover in place unless the connector is in use.

To remove the accessory cover and install an audio 

accessory:

1 Use a coin or other blunt object to loosen the screw 

that secures the accessory cover to the radio.

2 Remove the accessory cover and store it in a safe 

place.

3 Plug the accessory into the accessory connector.

4 Tighten the screw.

5 Once the radio has recognized the accessory, the 

accessory icon 

 will appear.