Tait TP3300 User manual - Time

57  Charging and caring for batteries

When the battery is low, your radio warns you in the 

following ways:

■

The battery symbol on the radio display looks 

empty.

■

The status LED on the radio slowly flashes red.

■

A high-pitched beep sounds.

You should recharge or replace the battery as soon 

as possible.

Charging a battery for the first 

time

Fully charge a battery before using it for the first time.

The red LED stays lit while the battery charges.

Charging a battery

Notice  For best charging performance, switch off the 

radio before placing it in the charger.

1 Desktop charger: Connect the charger to the 

correct Tait power adaptor.

6-way charger: Power on the charger.

Initially, all three LEDs are lit for 2 seconds.

2 Place just a battery in the charger, or a radio with 

a battery attached (desktop charger or 6-way 

charger only). There is no need to remove a belt 

clip, antenna, or any accessory that is attached to 

the accessory connector.

The red LED lights up, and stays lit while the 

battery charges.

When charging is complete, the green LED stays 

lit.