Tally T6215 Maintenance Manual - T6215 Maintenance Manual
Other manuals for T6215:
Maintenance Manual
of
164
T6215 Maintenance Manual
4–34
Step 11. Loosen the screw securing the Lower Idler Bracket and slide it down to adjust
the lower belt tension. Lay the angled end of the belt tension gauge on the
paper drive pulley and press it against the belt. Adjust the position of the
lower idler bracket until proper tension is achieved (see Figure 37).
Paper Tension Lever
Lower Drive Belt
Idler Bracket
Lower Paper
Drive Pulley
Paper Drive Motor
and Pulley Assy
Tension Gauge
Lower Belt Nominal
Tension Gauge
Gauge
should be
within this
zone
Figure 37. Placing Paper Tension Gauge.
Step 12. Move the Paper Tension Lever up and down to verify that the paper tension
ranges from loose to tight.