Tally T6215 Maintenance Manual - T6215 Maintenance Manual
Other manuals for T6215:
Maintenance Manual
of
164
T6215 Maintenance Manual
4–18
Platen Stop
Platen Stop
Platen
Platen Gap
Adjustment Wheel
#6 Phillips
screws
Figure 22. Removing screws from the platen stop.
Step 9. Pull the platen stop away from the side plate enough for the platen pin to clear
it.
Step 10. LIft the platen toward you, bringing the two platen gap adjust plates and the
right side curved-spring washer along with it.
Step 11. Both the Platen Gap Adjust plates and the right curved-spring washer must be
transferred to the new platen. The right Platen Gap Adjust plates and the
curved-spring washer can be transferred directly. Do this now.