TC Electronic D-TWO User Manual - page 19
21
DELAY MODES
Subdivision e.g. number of 1/8th notes.
Dial the CONTROL wheel to change the Tap time.
Turning the Tap time fully counter clockwise, will set the
Tap to Off meaning that the current Tap is disabled.
Taps cannot change order. This means that if a tap is
placed on top of a second tap, the second tap
automatically will be set to Off.
Additional Effects
To the Traditional Delay mode the effects described below
can be added:
Please see detailed description on the following pages.
Spatial:
Gives the Delay a wider feeling either by using left channel
offset or Phase Reverse of left, right or both channels.
Filter:
Enables a High and a Low Cut filter in the Feedback loop
and in the actual Delay line.
Chorus:
Adds Chorus, to smooth the Delay repeats.
Dynamic:
A ducking function that reduces the Output level of the
Delay with a specified level when the Input signal
exceeds a certain Threshold.
PingPong:
The PingPong effect is not available in the Traditional
mode.
PingPong
Basic operation
Entering the PingPong menu can be done in two ways:
Press PINGPONG and scroll to the Pingpong
parameters.
Double click the PINGPONG key for shortcut.
The PINGPONG key also works as on/off for the
PingPong function.
PingPong basically means that the Delay is panned in
accordance with the Tapped Delay time.
Style
Range: L-R, L-C-R and Dynamic
The Style parameter determines how the signal is
panned.
L-R
The L-R mode will pan the signal hard left, hard right.
L-C-R
Pannes the taps left, center and right accordingly.
Dynamic
This setting will fit the number of Delay repeats with the
number of panning positions. For example a Delay with 5
repeats would use 5 pan positions from left to right.
Please note that PingPong is in-active in the
traditional Delay mode.