Therm-App Hz Operation Manual - page 11
Therm-App
®
Operation Manual
Document: D03101_05 Page 11 of 19
Settings
Inside the Quick Menu
This menu allows you to quickly select:
[1] Imaging Mode
(Thermography or Night Vision).
[2] Emissivity and Reflected Temperatures
(see thermography settings on page 13).
[3] Turn on Temperature alerts (See # 5).
[4] Palette
[5] Configure Temperature Alerts: After you
have turned on temperature alerts [3] you can
set the Therm-App
®
Hz to flash a red alert when
it finds something below a certain temperature
(snowflake icon) or above a certain
temperature, (fire icon). The box flashes red
once a subject inside it crosses the preset
temperature. In the image, the temperature
alert has been set to go off for anything above
20.6°C, and the box is red because the
subject/area inside the box is 41.9°C.
Note:
Temperature measurements stabilize about 3
minutes after activating the Therm-App
®
Hz
device.
Thermography measurement might be influenced
by the environment of the measured objects, the
reflected temperature of the surrounding objects,
and/or the emissivity of the measured object.