Therm-App Hz Operation Manual - page 7
Therm-App
®
Operation Manual
Document: D03101_05 Page 7 of 19
Android Device Minimum Requirements
1. Therm-App
®
was designed to work with Android OS ver. 4.1 and above. Due to variations in
operating systems, compatibility issues may occur.
2. Your Android device must support USB OTG (On-The-Go, also known as USB host mode).
3. Therm-App
®
requires the use of a USB-OTG cable (male to male, micro USB).
*Please note: Most off-the-shelf cables are not USB-OTG and will not operate with the Therm-App
®
Hz
device. Use only the USB-OTG cables that are provided with the product.
For a full updated list of Android devices that support Therm-App
®
Hz,
click here
.
Contents of Therm-App
®
Hz
Box
Therm-App
®
Hz
comes with:
19mm lens
Ergonomic gripping handle
15cm right angle USB-OTG cable
15cm left angle USB-OTG cable
21cm straight USB-OTG cable
Quick start guide
Installation
Installing the Application
1. Make sure the Android device
operating
system
(OS) is either version 4.1 or above,
supporting USB On-The-Go (OTG).
2. Visit
Google Play
online and download the free
Therm-App
®
application, or scan the QR code.