VADDIO AutoTrak 2.0 Installation And User Manual - Short Term Confidential
AutoTrak 2.0 Camera Tracking System
©2012 Vaddio - All Rights Reserved. AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. A
Page 37 of 47
Image Sensor
1/3-Type CCD
Picture Elements
1.3 Megapixel
Signal System
HD: 1080p, 1080i or 720p @ 59.94; 1080p @ 60/50/30/25; 1080i or 720p @ 50
SD: Composite - NTSC or PAL (simultaneous HD & SD Out) Crop, Squeeze or Letterbox
Modes
Lens 18x
Optical
Zoom
Focal Length
f=4.7 to 84.6mm
Horizontal Viewing Angle
3.2 to 55.2 degrees (16:9)
Video S/N Ratio
>50 dB
Invertible Yes
Minimum Illumination
1.8 Lux
Serial Communication
RS-232 (9600 - Default for AutoTrak 2.0)
Pan Range
+170 degrees to -170 degrees
Tilt Range
+90 degrees to -30 degrees
Dimensions (H x W x D)
8.55” (217.2mm) H x 6.748” (171.4mm) W x 7.134” (181.2mm) D
Weight
5.8 lbs (2.63 kg)
AutoTrak 2.0 Audio Interface for system 999-7200-000 and 999-7210-000 only
Audio Outputs
Balanced Line Level (on XLR - M connector) +4dBu
Unbalanced Line Level (on RCA-F connector) -10dBV
Mic Output Volume Control
10k Audio Taper Potentiometer
Switch Gear
Tactile illuminated push button blue LED Power Switch (ON/OFF), and Mic Mute (Mute when lit)
Status Indicator
Blue LED
Display/LED Indicators Speed
Less than 299,792,458 meters per second (accounting for the index of refractivity of air - 1.0003
Antenna Connector
One (1) RP-SMA connector
Power Supply/Connector
12 VDC, 1.0 Amp Switching Supply, 5.5mm OD x 2.5mm ID coax receptacle on AutoTrak 2.0
Weight
Approx. 3.3 lbs (1.496854821 kg)
Dimensions Audio Interface
1.72” (43.688mm) H x 18.93 (480.822mm) W x 6” (152.4mm) D
Part Numbers
999-7200-000
With HD-18 Quick-Connect SR Interface (YPbPr output on Tracking Camera)
999-7205-000
999-7200-000 w/o AutoTrak 2.0 Audio Interface and w/Worldwide Belt Pack
999-7210-000
With Quick-Connect DVI-D/HDMI SR Interface (YPbPr and DVI-D outputs on Tracking Camera)
999-7215-000
999-7210-000 w/o AutoTrak 2.0 Audio Interface and w/Worldwide Belt Pack
Origin
Made in the USA with the exception of the AutoTrak 2.0 CPU (assembled in the USA)
*
All Specifications are subject to change without prior notice.
Warranty Information:
(See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details):
Hardware* Warranty:
One year limited warranty on all parts. Vaddio warrants this product against defects in
materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice
of such defects during the warranty period, they will, at their option, repair or replace products that prove to be
defective. Please see Vaddio’s Service Terms and Conditions at vaddio.com for specific details and policies.
Exclusions
: The above warranty shall not apply to defects resulting from: improper or inadequate maintenance by
the customer, customer applied software or interfacing, unauthorized modifications or misuse, operation outside the
normal environmental specifications for the product, use of the incorrect power supply, improper installation (plugging
things in wrong), improper extension of the power supply cable or improper site operation and maintenance.
Vaddio Customer Service:
Vaddio will test, repair, or replace the product or products without charge if the unit is
under warranty and is found to be defective. If the product is out of warranty, Vaddio will test then repair the product
or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior
to repair. All components must be returned for testing as a complete unit. Vaddio will not accept responsibility for
shipment after it has left the premises. Vaddio will only advance replace out of box failures or random equipment
failures up to 30 days after the purchase date (not the install date).
Vaddio Technical Support:
Vaddio technicians will determine and discuss with the customer the criteria for repair
costs and/or replacement. Vaddio Technical Support can be contacted through one of the following resources: e-mail
support at
support@vaddio.com
or online at
www.vaddio.com
.
Return Material Authorization (RMA) Number:
Before returning a product for repair or replacement, request an
RMA from Vaddio’s technical support. Provide a technician with a return phone number, e-mail address, shipping
address, and product serial numbers and describe the reason for repairs or returns as well as the date of purchase