Valor Legend 937XN Installation And Owner's Manual - page 11
11
12.
CERAMIC FUEL BED ASSEMBLY
12.1
Place the ceramic back wall in position centrally at the
back of the firebox. It must rest on the metal ledge at the
back of the firebox (see figure 11).
12.2
Place the ceramic side walls in position at the sides of the
firebox. The sides are left and right handed. The sides
should locate in the sloping channels near the bottom of
the firebox sides and in the gap between each side of the
firebox and the black top baffle (see figure 12).
12.3
Place the rear log in the retaining cradle behind the rear
burner tube with its back against the back wall. Center the
log so that the gap to the side wall is the same at each side
(see figure 13).
12.4
Place the center log on the retaining cradles between the
rear and front burner tubes. Center the log so that the gap
to the side wall is the same at each side
(see figure 14).
Fig. 11. Back wall position
Fig. 12 Side walls position
Fig.13 Rear log position
Fig. 14 Centre log position