Vega VEGAPULS 68 Operating Instructions Manual - page 29
9 Dismounting
9.1 Dismounting steps
Warning:
Before dismounting, be aware of dangerous process conditions such
as e.g. pressure in the vessel, high temperatures, corrosive or toxic
products etc.
Take note of chapters "Mounting" and "Connecting to power supply"
and carry out the listed steps in reverse order.
9.2 Disposal
The instrument consists of materials which can be recycled by
specialised recycling companies. We use recyclable materials and
have designed the electronics to be easily separable.
WEEE directive 2002/96/EG
This instrument is not subject to the WEEE directive 2002/96/EG and
the respective national laws. Pass the instrument directly on to a
specialised recycling company and do not use the municipal collecting
points. These may be used only for privately used products according
to the WEEE directive.
Correct disposal avoids negative effects to persons and environment
and ensures recycling of useful raw materials.
Materials: see chapter "Technical data"
If you have no possibility to dispose of the old instrument
professionally, please contact us concerning return and disposal.
VEGAPULS 68 • 4 … 20 mA/HART two-wire
55
9 Dismounting
29261
-EN
-090305
10 Supplement
10.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
- Process fitting
316L, Hastelloy C22, Hastelloy C22 plated
- Antenna
316L, 316L electropolished, 316L Safecoat coated,
Hastelloy C22, stainless steel precision casting
1.4848
- Seal process fitting - threaded version
Klingersil C-4400
- Antenna cone
PTFE (TFM 1600 PTFE)
- seal, antenna system
FKM (Viton), FFKM (Kalrez 2035, 6230 (FDA),
6375)
Materials, non-wetted parts
- Housing
Plastic PBT (polyester), Alu die-casting powder-
coated, stainless steel 316L
- Seal between housing and housing
cover
NBR (stainless steel housing), silicone (Alu/plastic
housing)
- Inspection window in housing cover for
PLICSCOM
Polycarbonate (UL-746-C listed)
- Ground terminal
316Ti/316L
Weight with horn antenna
- Process fitting - thread, depending on
thread size and housing
2 … 2.8 kg (4.409 … 6.173 lbs)
- Process fitting - flange, depending on
flange size and housing
4.2 … 15.4 kg (9.259 … 33.95 lbs)
- Process fitting swivelling holder with
flange, depending on flange size and
housing
5.2 … 16.4 kg (11.46 … 35.16 lbs)
Weight with parabolic antenna
- Process fitting - thread, depending on
thread size and housing
2.8 … 3.6 kg (6.173 … 7.496 lbs)
- Process fitting - flange, depending on
flange size and housing
5 … 16.2 kg (11.02 … 35.71 lbs)
- Process fitting swivelling holder with
flange, depending on flange size and
housing
6 … 17.2 kg (13.23 … 37.92 lbs)
Output variable
Output signal
4 … 20 mA/HART
56
VEGAPULS 68 • 4 … 20 mA/HART two-wire
10 Supplement
29261
-EN
-090305