Quick setup guide radar sensor for continuous level measurement of liquids vegapuls 62 4 … 20 ma/hart - two-wire document id: 51872.
2 contents vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 contents 1 for your safety 1.1 authorised personnel ....................................................................................................... 3 1.2 appropriate use ..........................................................
3 1 for your safety vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 1 for your safety 1.1 authorised personnel all operations described in this operating instructions manual must be carried out only by trained specialist personnel authorised by the plant operator. During work on and with the...
4 1 for your safety vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 1.6 ce conformity thedevicefulfilsthelegalrequirementsoftheapplicableecguide- lines.Byaffixingthecemarking,weconfirmsuccessfultestingofthe product. Youcanfindthececertificateofconformityinthedownloadsection of our homepage. ...
5 2 product description vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 2 product description 2.1 configuration thetypelabelcontainsthemostimportantdataforidentificationand use of the instrument: • instrument type • article and serial number device • article number, documentation • technical...
6 3mounting vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 3 mounting 3.1 mounting preparations - horn antenna vegapuls 62 is also available in versions where the antenna has a biggerdiameterthantheprocessfitting(thread,flange).Theantenna mustthereforebedisconnectedfromtheprocessfittingbefo...
7 3mounting vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 1. Clampvegapuls62withtheflange,e.G.Inabenchvice 2. Holdtheconnectionpiece(3)withawrench(spannersize22)on theflattenings 3. Loosencounternut(2)withspannersize36completelyinthe direction antenna 4. Loosen compression nut (1) with a w...
8 3mounting vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 ca . 10 mm > 200 mm (7.87") fig. 3: distance of the antenna to the vessel wall/vessel ceiling 2. Note min. Socket diameter depending on the socket length for further information see chapter "mounting"..
9 4 connecting to power supply vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 4 connecting to power supply 4.1 connection procedure proceed as follows: 1. Unscrew the housing lid 2. If a display and adjustment module is installed, remove it by turn- ing it to the left. 3. Loosen compression...
10 4 connecting to power supply vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 4.2 wiring plan, single chamber housing thefollowingillustrationsapplytothenon-exaswellastotheex-ia version. I2c display 1 1 2 5 6 7 8 fig. 5: wiring plan, single chamber housing 1 voltage supply, signal output 4...
11 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 5 set up with the display and adjustment module plicscom 5.1 insert display and adjustment module the display and adjustment module can be inserted into the sensor and removed again at any time...
12 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 5.2 setup steps 1. Go to the menu "basic adjustment" via the display and adjust- ment module. ▶ basic adjustment display diagnostics service info 2. Carry out the adjustment in the menu items "...
13 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 100% 0% 0,5 m (19.68 ") 5 m (196.9 ") 2 1 3 fig. 8: parameter adjustment example min./max. Adjustment 1 min. Level = max. Measuring distance 2 max. Level = min. Measuring distance 3 reference p...
14 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 3. Confirm"false signal suppression - change now" with [ok] and select in the below menu "create new". Enter the actual distance from the sensor to the product surface. All false signals in thi...
15 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 diagnostics basic adjustment 3 display ▶ diagnostics service info peak value indicator 3.1 distance min.: 0.234 m(d) distancemax.:5.385m(d) meas.Certainty 3.2 15 db sensor status ok curve selec...
16 6 supplement vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 6 supplement 6.1 technical data noteforapprovedinstruments the technical data in the respective safety instructions are valid for approved instruments (e.G. With exapproval).Thesedatacandifferfromthedatalistedherein,forexamplere...
17 6 supplement vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620 permissible residual ripple Ʋ u ss Ʋ 100hz…10khz u ss load resistor Ʋ calculation (u b - u min )/0.022 a Ʋ example-non-exinstrumentwith u b = 24 v dc (24v-14v)/0.022a=455Ω.
18 notes vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620
19 notes vegapuls 62 • 4 … 20 ma/hart - two-wire 51872-en-160620
Printing date: vega grieshaber kg am hohenstein 113 77761 schiltach germany 51872-en-160620 all statements concerning scope of delivery, application, practical use and operat- ing conditions of the sensors and processing systems correspond to the information available at the time of printing. Subjec...
