1. DL manuals
  2. Vega
  3. Radar
  4. VEGAPULS 61
  5. Quick setup manual

Vega VEGAPULS 61 Quick setup manual

Manual is about: Radar sensor for continuous level measurement of liquids

Summary of VEGAPULS 61

  • Page 1

    Quick setup guide radar sensor for continuous level measurement of liquids vegapuls 61 4 … 20 ma/hart - four-wire document id: 47100

  • Page 2: Contents

    2 contents vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 contents 1 for your safety ......................................................................................................................... 3 1.1 authorised personnel ...........................................................

  • Page 3: 1  For Your Safety

    3 1 for your safety vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 1 for your safety 1.1 authorised personnel all operations described in this documentation must be carried out only by trained specialist personnel authorised by the plant operator. During work on and with the device the req...

  • Page 4

    4 1 for your safety vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 depending on the instrument version, the emitting frequencies are in the c, k or w band range. The low emission power is far below the internationally approved limit values. When used correctly, the device poses no danger t...

  • Page 5

    5 1 for your safety vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 1.8 radio license for usa thisapprovalisonlyvalidforusa.Hencethefollowingtextisonly available in the english language. This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions...

  • Page 6: 2  Product Description

    6 2 product description vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 2 product description 2.1 configuration thetypelabelcontainsthemostimportantdataforidentificationand use of the instrument: 2 1 15 13 14 12 11 5 3 6 4 7 8 10 9 fig. 1: layout of the type label (example) 1 instrument typ...

  • Page 7

    7 2 product description vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 this operating instructions manual applies to the following instrument versions: • hardware from 2.1.0 • software from 4.5.1 scope of this operating instructions manual.

  • Page 8: 3 Mounting

    8 3 mounting vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 3 mounting 3.1 collaroradapterflange formountingtheinstrumentonasocket,acombicompressionflange fordn80(asme3"orjis80)isalsoavailableforretrofitting.Option- ally,theinstrumentcanbealsoequippedwithanadapterflangefrom dn 100 (asme 4"...

  • Page 9

    9 3 mounting vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 – angleofinclination180°,infinitelyvariable – angle of inclination in three steps 0°, 90° and 180° • double chamber housing – angleofinclination90°,infinitelyvariable – angle of inclination in two steps 0° and 90° fig. 3: adjustme...

  • Page 10

    10 3 mounting vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 2. Note min. Socket diameter depending on the socket length for further information see chapter "mounting"..

  • Page 11

    11 4 connecting to power supply vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 4 connecting to power supply 4.1 connecting the voltage supply and signal output are connected via the spring- loaded terminals in the housing. Connection to the display and adjustment module or to the interface...

  • Page 12

    12 4 connecting to power supply vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 6. Check the hold of the wires in the terminals by lightly pulling on them 7. Connect the screen to the internal ground terminal, connect the outer ground terminal to potential equalisation in case of power supp...

  • Page 13

    13 4 connecting to power supply vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 power supply 4...20ma active passive common is gnd 5 1 /l /n 2 + ( ) (-) 6 7 8 fig. 8: connection compartment with double chamber housing with low voltage terminal function polarity 1 voltage supply +/l 2 voltag...

  • Page 14: Module

    14 5 set up with the display and adjustment module vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 5 set up with the display and adjustment module 5.1 insert display and adjustment module the display and adjustment module can be inserted into the sensor andremovedagainatanytime.Youcanchoose...

  • Page 15

    15 5 set up with the display and adjustment module vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 3. Select in the menu item "application" the vessel, the application andthevesselform,forexample,storagetank. 4. Carry out the adjustment in the menu items "min. Adjustment" and "max. Adjustme...

  • Page 16

    16 5 set up with the display and adjustment module vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 it is absolutely necessary if you want to use the asset management functions. If possible, the curve should be saved with a low level in the vessel. With the adjustment software pactware and a...

  • Page 17

    17 5 set up with the display and adjustment module vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 if a false signal suppression has already been saved in the sensor, the following menu window appears when selecting "false signal suppression": delete: an already created false signal suppres...

  • Page 18

    18 5 set up with the display and adjustment module vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 menu item default setting menu language order-specific displayed value 1 currentoutputin% displayed value 2 ceramic measuring cell: measuring cell tempera- ture in °c metallic measuring cell: ...

  • Page 19

    19 5 set up with the display and adjustment module vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 menu item parameter instrument version hardware and software version factory calibration date date sensor characteristics order-specificcharacteristics.

  • Page 20: 6 Supplement

    20 6 supplement vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226 6 supplement 6.1 technical data note for approved instruments the technical data in the respective safety instructions are valid for approved instruments (e.G. With exapproval).Thesedatacandifferfromthedatalistedherein,forexamp...

  • Page 21

    21 notes vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226.

  • Page 22

    22 notes vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226.

  • Page 23

    23 notes vegapuls 61 • 4 … 20 ma/hart - four-wire 47100-en-180226.

  • Page 24

    Printing date: vega grieshaber kg am hohenstein 113 77761 schiltach germany 47100-en-180226 all statements concerning scope of delivery, application, practical use and operat- ing conditions of the sensors and processing systems correspond to the information available at the time of printing. Subjec...