Quick setup guide radar sensor for continuous level measurement of liquids vegapuls 65 4 … 20 ma/hart - four-wire document id: 51885.
2 contents vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 contents 1 for your safety 1.1 authorised personnel ....................................................................................................... 3 1.2 appropriate use .........................................................
3 1 for your safety vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 1 for your safety 1.1 authorised personnel all operations described in this operating instructions manual must be carried out only by trained specialist personnel authorised by the plant operator. During work on and with th...
4 1 for your safety vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 1.6 ce conformity thedevicefulfilsthelegalrequirementsoftheapplicableecguide- lines.Byaffixingthecemarking,weconfirmsuccessfultestingofthe product. Youcanfindthececertificateofconformityinthedownloadsection of our homepage....
5 1 for your safety vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 1.9 environmental instructions protection of the environment is one of our most important duties. That is why we have introduced an environment management system with the goal of continuously improving company environmental...
6 2 product description vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 2 product description 2.1 configuration thetypelabelcontainsthemostimportantdataforidentificationand use of the instrument: • instrument type • article and serial number device • article number, documentation • technica...
7 3mounting vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 3 mounting 3.1 mounting instructions 1. Distance from the vessel wall > 200 mm, the antenna should protrude > 10 mm into the vessel > 500 mm (19.69") fig. 1: distance of the antenna to the vessel wall/vessel ceiling 2. Note min. So...
8 4 connecting to power supply vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 4 connecting to power supply 4.1 connection procedure proceed as follows: 1. Unscrew the housing lid 2. If a display and adjustment module is installed, remove it by turn- ing it to the left. 3. Loosen compressio...
9 4 connecting to power supply vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 4.2 wiring plan, double chamber housing thefollowingillustrationsapplytothenon-exandalsototheex-ia version. 4 ... 20 ma pe / l / n l1 n gnd 1 2 1 2 3 4 4...20ma is fig. 3: wiring plan, double chamber housing 1 vo...
10 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 5 set up with the display and adjustment module plicscom 5.1 insert display and adjustment module the display and adjustment module can be inserted into the sensor and removed again at any tim...
11 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 5.2 setup steps 1. Go to the menu "basic adjustment" via the display and adjust- ment module. ▶ basic adjustment display diagnostics service info 2. Carry out the adjustment in the menu items ...
12 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 100% 0% 1 m (39.37 ") 10 m (393.7 ") 2 1 3 fig. 5: parameterization example 1 min. Level = max. Measuring distance 2 max. Level = min. Measuring distance 3 reference plane for this adjustment,...
13 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 100% 0% 1 m (39.37 ") 10 m (393.7 ") 2 1 3 fig. 6: parameterization example 1 min. Level = max. Measuring distance 2 max. Level = min. Measuring distance 3 reference plane for this adjustment,...
14 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 basic adjustment ▶ basic adjustment 1 display diagnostics service info min.Adjustment 1.1 0.00 % = 30.000 m(d) 0.665 m(d) max.Adjustment 1.2 100.00 % = 0.000 m(d) 0.665 m(d) medium 1.3 liquid ...
15 5setupwiththedisplayandadjustmentmoduleplicscom vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 service basic adjustment 4 display diagnostics ▶ service info false signal suppression 4.1 change now? Extendedsetting 4.2 none ▼ quick level change ▼ current output 4.3 characteristic: 4-20 m...
16 6 supplement vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621 6 supplement 6.1 technical data noteforapprovedinstruments the technical data in the respective safety instructions are valid for approved instruments (e.G. With exapproval).Thesedatacandifferfromthedatalistedherein,forexampler...
17 notes vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621.
18 notes vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621.
19 notes vegapuls 65 • 4 … 20 ma/hart - four-wire 51885-en-160621.
Printing date: vega grieshaber kg am hohenstein 113 77761 schiltach germany 51885-en-160621 all statements concerning scope of delivery, application, practical use and operat- ing conditions of the sensors and processing systems correspond to the information available at the time of printing. Subjec...