Waldorf BP8080G Installation And Operation Manual - page 19
17
Operation
Turning ‘OFF’ the Bratt Pan (All Models)
1.
To turn bratt pan to ‘PILOT’ burner position, set gas control knob to ‘PILOT’ position. Main burner
will now turn ‘OFF’ and pilot burner will remain lit.
2.
To turn bratt pan ‘OFF’ completely, rotate gas control knob to ‘OFF’ position by depressing and
turning gas control knob clockwise. Pilot burner will turn ‘OFF’.
3.
Turn ‘OFF’ electrical power to bratt pan at mains supply otherwise ignitor will continually attempt to
light the pilot.
NOTE: If gas supply is turned ‘OFF’ at mains supply and gas control knob on control panel is
left in pilot position, with electrical power still ‘ON’ at bratt pan, the ignitor will
continue to operate and attempt to ignite the pilot. Ensure that electrical power is also
turned ‘OFF’ at mains supply.
IMPORTANT:
Should any abnormal operation like;
- ignition problems,
- abnormal burner flame,
- burner control problems,
- partial or full loss of burner flame in normal operation, be noticed, appliance requires
IMMEDIATE service by a qualified service person and should not be used until such service
is carried out.