Waldorf BP8080G Installation And Operation Manual - page 21
19
Cleaning and Maintenance
Weekly Cleaning
NOTE:
If bratt pan usage is very high, we recommend that weekly cleaning procedure is
carried out on a more frequent basis.
Ensure that protective gloves are worn during cleaning process.
DO NOT use harsh abrasive detergents, strong solvents, sharp scrapers or caustic
detergents as they will damage surface of bratt pan.
DO NOT use water on burners while they are still hot as cracking may occur. Allow
these items to cool and remove for cleaning.
DO NOT clean burners in a dishwasher.
Thoroughly clean interior and exterior of bratt pan regularly. Do not use wire brushes on the pan. Clean
using a mild detergent and a hot water solution using soft cloth or a soft bristled brush. Dry appliance
thoroughly using a dry clean cloth.
NOTE: To prevent rust forming on steel components, ensure that all detergent and cleaning
material has been entirely removed after each cleaning process.
Stainless Steel Surfaces
a. Clean interior and exterior surfaces of bratt pan with hot water, a mild detergent solution and a
soft scrubbing brush. Note that gas control knobs are a push fit onto gas and water control valve
spindles and can be removed to clean control panel.
b. Baked on deposits or discolouration may require a good quality stainless steel cleaner or stainless
steel wool. Always apply cleaner when appliance is cold and rub in direction of grain.
c. It should not be necessary to remove manual tilt mechanism handwheel for cleaning purposes.
d. Dry all components thoroughly with a dry cloth and polish with a soft dry cloth.
e. To remove any discolouration, use an approved stainless steel cleaner or stainless steel wool.
Always rub in direction of grain.
Periodic Maintenance
NOTE: All maintenance operations should only be carried out by a qualified service person.
To achieve the best results, cleaning must be regular and thorough and all controls and mechanical parts
should be checked and adjusted periodically by a qualified service person. If any small faults occur, have
them attended to promptly. Don't wait until they cause a complete breakdown. It is recommended that
the appliance is serviced every 6 months.