WaterRower M1 SERIES Owner's Manual - page 14
26
27
WARRANTY
PRIVATE AND COMMERCIAL USE - WaterRower will replace or repair at its factory or
nominated service facility any WaterRower or WaterRower component found to be defective
in material or workmanship for a period of ONE (1) YEAR from the date of initial shipment by
WaterRower. The warranty is upgradeable to THREE (3) YEARS on all components and FIVE
(5) YEARS on all wooden elements by registering your WaterRower within the first year of
purchase.
This warranty will be invalid if, in the opinion of WaterRower, the claim has been caused
by: (a) accident, abuse, misuse, misapplication or as a result of any modification other than
by WaterRower, (b) deterioration due to normal wear and tear, (c) improper preventative
maintenance steps as described in the WaterRower Owner’s Manual.
The warranty will be voided if, in the opinion of WaterRower, the claim is found to be a result
of: (a) improper assembly of the product, (b) usage beyond the design of the product, (c)
overfilling of the tank as advised in the Assembly Manuals, (d) use of alternative purification
option in tank beyond approved WaterRower product, (e) use of improper cleaning materials
as described in the preventative maintenance steps, (f) use and/or storage of product in
inclement weather, including but not limited, to extreme temperatures and moisture.
This warranty is not transferable. WaterRower (US) Inc. shall not be liable for any direct,
consequential, incidental indirect or special damages under this warranty, or any implied
warranty.
Return of the WaterRower or WaterRower component to WaterRower’s factory or nominated
service centre will be the responsibility of the claimant. The WaterRower or component should
be packed to protect it from damage; WaterRower will not be responsible for any damage
which may occur during shipment. Postage should be prepaid and the package should contain
the claimant’s name, address and telephone number, a description of the problem and proof
of purchase.
WaterRower will return the WaterRower or WaterRower component to the claimant at its
(WaterRower’s) expense except in the case where the warranty has been deemed void or
invalid. In the event that the warranty is found to have been void or invalid, then the costs of
such investigation, repair and any associated shipping costs shall be borne by the claimant.
WaterRower will ground/economy ship all replacement warranty parts. Charges will apply for
all alternative shipping methods. Product shipped outside of its initial purchase country may
be subject to additional warranty cost and shipping charges.
WaterRower warrants against any defective WaterRower spare part received from
WaterRower or any authorized dealer for a period of NINETY (90) DAYS after the date of
shipment.
The warranty described above shall be in lieu of any other warranty, express or implied,
including but not limited to, any implied warranty of merchantability or fitness for a particular
purpose. The term of this warranty does not affect or prejudice the statutory rights of a
consumer, neither does it limit or exclude any liability for death or personal injury caused by
WaterRower’s negligence.
Additional information on parts, assembly, preventative maintenance and manuals, as
referred to within this warranty document, can be found at www.waterrower.com/warranty.
Please consult your local WaterRower office or local distributor for specific warranty details.
ADVANCED PROGRAM 8: TANK VOLUME
OK
WaterRower Series IV Performance Monitor
workout
programs
stored
programs
zones
hold/reset
units
advanced
on
W
duration
distance
heartrate
strokerate
intensity
advanced
program
liters
This program allows you to input the volume of
water in the tank. The tank volume is necessary
in calculation of power (watts).
1. Press the
Advanced button
eight (8) times
.
2. Press
OK.
3. Using the
Arrows, enter the tank volume
(seen in the intensity window).
4. When desired volume is reached, press
OK.
ADVANCED PROGRAM 9: FIRMWARE VERSION / TOTAL MACHINE DISTANCE
OK
WaterRower Series IV Performance Monitor
workout
programs
stored
programs
zones
hold/reset
units
advanced
on
duration
distance
heartrate
strokerate
intensity
km
advanced
program
This program allows you to view the Firmware
Version (the version of the software that
runs the monitor) and the total distance the
machine has traveled.
1. Press the
Advanced button
nine (9) times
.
2. The total lifetime distance (in km) will be
displayed.
3. Press
OK.
4. The total lifetime distance (in km) and
Firmware version will be displayed.
ADVANCED BUTTON (CONTINUED)
AUTOSTORE PROGRAMS
OK
WaterRower Series IV Performance Monitor
workout
programs
stored
programs
zones
hold/reset
units
advanced
on
duration
projected distance
heartrate
strokerate
intensity
meters
miles
km
strokes
workout
load
The WaterRower S4 monitor includes an
AutoStore function which automatically stores
the last 9 historic workout program settings.
Note: Changing the batteries will erase stored
programs.
RETRIEVING AUTOSTORE PROGRAMS
OK
WaterRower Series IV Performance Monitor
workout
programs
stored
programs
zones
hold/reset
units
advanced
on
duration projected
distance
heartrate
strokerate
intensity
workout
interval
load
1. Press the
Stored Programs button.
2. The historic sequence of workouts (1-9) will
appear in the program window.
3. The monitor will automatically scroll
through the workout settings.
4. When desired workout is highlighted,
press
OK; Row
.
STORED PROGRAMS BUTTON