WATT AGE Fokker Dr.1 Assembly Instructions Manual - page 18
Page
step 1: hinging the Ailerons
❑
Cutthreehingeslotsintheleadingedgeofeachaileron,thenslidethe
hingesintoplace,usingthesametechniquesthatyoudidtoinstallthehinges
intheelevatorandtherudder.Positionthehingesatthelocationsshown.
❑
Cutthecorrespondinghingeslotsinthetrailingedgeofthewing,then
hingetheaileronstothewing,usingthesametechniquesthatyouusedto
hingetheelevatorandtherudder.
❑
AfterallowingtheC/Atocompletelycure,gentlypullontheaileronstochecktheintegrityofthehinges.Thehingesshouldhold
securely.Ifoneormorehingesisloose,applymoreC/Atothehinge(s).
step 2: instAlling the Aileron Control horns
❑
Cutawaythecoveringmaterialfromover
only the bottomofthecontrol
hornmountingslotineachaileron.
❑
Gluethecontrolhornsintothemountingslots,makingsurethatthecontrol
hornsarefacingforward.
step 3: instAlling the Aileron serVos
❑
Cutawaythecoveringmaterialfromovertheservoleadexitholesinthe
bottomofthewing,thencutawaythecoveringmaterialfromovertheservo
mountingholes.
❑
Pulltheservoleadsthroughthewingfromtheservomountingholesand
outtheservoleadexitholes,thenmountyourservosintothewing.
IMPORTANT Installtheservossothattheoutputshaftsaretowardthe
wingtips.Dependingonthesizeofyourservos,youmayneedtoenlarge
theservomountingholes.
❑
Installaservoextensionleadontoeachofyouraileronservos.