Page 1 ti-810+ motherboard note to users this user’s guide & technical reference are for assisting system manu- facturers and end users in setting up and installing the motherboard. Every effort has been made to ensure that the information in this manual is accurate. Weal union development limited i...
Ti-810+ motherboard page 2 table of contents chapter 1 introduction...........................................................3 1.1 product features ..................................................................................... 3 1.2 full software configurable ...................................
Page 3 ti-810+ motherboard chapter 1 introduction 1.1 product features the ti-810+ highest performance motherboard is based on the all new intel 810 chipset with baby at form factor to support the latest socket 370 including intel pentium iii fcpga, celeron fcpga / ppga as well as cyrix iii processo...
Ti-810+ motherboard page 4 1.3 features summary this motherboard comes with following features: support intel pentium iii fcpga, celeron ppga or cyrix iii processor on socket 370 intel 810 chipset on model ti-810+ support 66/100mhz processor front-side bus intel 810e chipset on model ti-810+e suppor...
Page 5 ti-810+ motherboard chapter 2 installation 2.1 installation instructions this section covers external connectors and memory configuration. Please refer to the motherboard layout chart for external connectors, slots and i/o ports. Further- more, this section lists all necessary connector pin a...
Ti-810+ motherboard page 6 2.3 function & installation instructions 2.3.1 at power supply connector (12-pin) this connector connects to a standard 5v power supply. To connect the leads from the power supply, ensure first that the power supply is not power on. Most power supplies provide two plugs, a...
Page 7 ti-810+ motherboard 2.3.3 at keyboard connector this connector supports a standard ibm-compatible keyboard, such as 101/102 enhanced keyboard (use a ps/2 keyboard adapter in order to connect a ps/2 kb to this at connector.). 2.3.4 serial (com1/com2) port connector this motherboard provides tw...
Ti-810+ motherboard page 8 expansion cards installation before adding or removing any expansion cards or system components, confirm that you already unplugged your power supply. Otherwise, it may severely damage to your motherboard and expansion cards. Please follow the installation procedures as be...
Page 9 ti-810+ motherboard if you install two ide devices on the same cable, you must configure the second device to slave mode by setting its jumper accordingly. (refer to your ide device document for the jumper settings. Pin 20 is removed to prevent inserting in the wrong orientation when using ri...
Ti-810+ motherboard page 10 2.3.15 pga370s cpu socket the motherboard provides a zif socket 370. The cpu that comes with the motherboard should have a fan attached to it to prevent overheating. If it is not so, purchase a fan before you turn on your system. Notice!!! Be sure that there is a sufficie...
Page 11 ti-810+ motherboard 2.3.18 internal audio connectors(cd, aux, 4-pin modem) these connectors allow you to receive stereo audio input from such sound sources as a cd-rom, mpeg card. The modem connector allows the onboard audio to interface with an voice modem card with a similar connector. It ...
Ti-810+ motherboard page 12 chapter 4 amibios setup amibios hiflex setup utility - version 1.21 (c)1998 american megatrends, inc. All rights reserved standard cmos setup advanced cmos setup advanced chipset setup power management setup pci / plug and play setup peripheral setup cpu configuration set...
Page 13 ti-810+ motherboard 3. Using the arrows on your keyboard, select an option, and press . Modify the system parameters to reflect the options installed in your system. Otherwise you may return to the main menu anytime by pressing . Types of setup description standard cmos setup sets time, date...
Ti-810+ motherboard page 14 4.1 standard cmos setup select the amibios setup options by choosing standard setup from the amibios setup main menu. Standard setup options are described below. Floppy drive a: and b: move the cursor to these fields via and and select the floppy type. The settings are 36...
Page 15 ti-810+ motherboard type how to configure scsi select type. Select not installed the drive parameter screen. The scsi drivers provided by the scsi manufacturer should allow you to config- ure the scsi drive. Ide select type. Select auto to let amibios determine the parameters. Click on ok wh...
Ti-810+ motherboard page 16 4.2 advanced cmos setup the amibios setup options described in this section are selected by choos- ing advanced cmos setup from the amibios setup main menu. 4.3 advanced chipset setup choose chipset setup on the amibios setup main menu. All chipset setup options are then ...
