Weal Union TI-810+ User Manual - Chapter 1
Page 3
TI-810+ Motherboard
Chapter 1
Introduction
1.1 Product Features
The TI-810+ highest performance motherboard is based on the all new Intel
810 chipset with Baby AT form factor to support the latest Socket 370
including Intel Pentium III FCPGA, Celeron FCPGA / PPGA as well as
Cyrix III processors. This chipset incorporates with AGP 3D Graphics
Support and an optional Crystal AC97 Audio. This motherboard is also
fully software configurable via AMI BIOS setup and supports high-speed
UDMA/66 IDE devices. The motherboard supports either an AT or ATX
Power Supply.
1.2 Full Software Configurable
TIGA motherboards are full software configurable. There is no jumper or
DIP switch on board and all the necessary hardware settings are made
through CMOS setup. This motherboard auto-detects the CPU brand and
core voltage, where as the CPU speed is selected in CMOS setup menu by
the instruction of users.
In addition, TIGA motherboard employs AMI BIOS which provides two
start-up hot keys “J” and “F” to give a way out of stability problems due to
improper CMOS settings. That is, to press “J” key at the same time to
switch on the system, which re-detects CPU brand and allows user to
select again in the CMOS setup. To press “F” key at the same time to
switch on the system clearing all CMOS settings (except BIOS passwords).