Webasto Diesel Cooker x100 Installation Instructions Manual - Webasto Diesel Cooker X100
4 / ENGLISH
Webasto Diesel Cooker X100
The cooker, exhaust gas tube and all
other metal parts must be insulated from
the vehicle metal chassis so that in case
of an electrical malfunction the voltage
is not transferred from the chassis to the
cooker or vice versa.
Do not install the cooker in an area
where there may be petrol fumes
⇒ risk
of explosion.
3. Installation
3.1 Cooker location
When installing a cooker it
should be noted that it has to
be dismounted for servicing.
It is advisable to make the
connections in such a way
that the device can be easily
disconnected for servicing.
There must be at least 20
mm between the cooker and
any vertical surface. See
figure 2. Make sure that
inflammable materials like
curtains cannot touch the
ceramic plate.
An authorized Webasto
service center has to take
care of the installation.
3.1.1 Location of pipes,
hoses and wires
The power cords and fuel
hoses must be protected in
places where they are
exposed to mechanical
damage due to, for example,
sharp objects or heat.
Materials which come into
contact with parts of the
cooker or the coaxial
exhaust tube have to resist
temperatures of 80 °C.
Figure 2: