Weber Motor MPE 850 Service Manual - page 13
13
SHB MPE850 Rev 1.2 | 408014 | 408090 | 408101 |
3.3 Fuel
3.4 Engine oil
Engine damage due to incorrect engine oil grade or viscosity.
An incorrect engine oil grade or viscosity causes excessive wear and
moving parts may start to seize up.
►
Always use the recommended engine oil.
►
Do not mix engine oils of different grades or degrees of viscosity.
Engine variants I2 846 MAR TC-80, TC-100 and TC-120:
Unleaded gasoline (super) with an octane rating of 95 ROZ or 85 MOZ.
USA: "Premium 91", unleaded
Engine variant I2 846 MAR TC-155:
Unleaded gasoline (super) with an octane rating of 98 ROZ or 88 MOZ.
USA: „Premium 93“, unleaded
NOTICE! Low octane fuel can cause loss of power and/or increased fuel
consumption.
Unleaded gasoline with an octane rating of at least 91 ROZ or 82,5 MOZ.
USA: At least "Regular 87", unleaded
NOTICE! An increased share of ethanol can lead to premature abrasion
and poor starting performance of the engine.
Maximum 15 % (E15)
Recommended fuel quality
Minimum requirement
Permissible share of ethanol
0W 40 completely synthetic, at least API SJ, ACEA A3/B3
Initial filling 3,5 liters [3.7 qt (US)]
After changing oil 2,9 liters [3.1 qt (US)]
Engine oil
Fill quantity
Information!
Weber Motor recommends you always to keep a supply of engine oil to hand. Consult
your local vehicle dealer.
3 Description
3.3 Fuel | 3.4 Engine oil