Weber Motor MPE 850 Service Manual - page 29
29
SHB MPE850 Rev 1.2 | 408014 | 408090 | 408101 |
4 Operation
4.4 Service after driving
4.4.3 Transport and storage of the vehicle
If you intend to transport or place the vehicle in storage, read the following instructions:
►
If you do not intend to operate the engine for 30 days or more, prepare the engine for storage. (See
chapter 5.1 Engine idle for more than 30 days.)
►
Transport and store the vehicle on a preferably stable and flat surface. If you do not have any flat
surface available, note for storage necessarily the angles in the figure. Do not exceed these angles.
►
Store the vehicle in a clean, dry place with an ambient temperature of -30 – 45 °C [-22 – 113 °F].
4.4.2 Corrosion protection
If you operate your vehicle in salt water, regularly use a corrosion protection spray. (See chapter 4.1 Service
intervals.)
Information!
For information about suitable products and their using, please consult your local
vehicle dealer.