WoodPro WS-TS-1500 Owner's Manual - page 22
WARNING: REPLACE GLASS ONLY WITH
4MM
HIGH TEMPERATURE CERAMIC GLASS OF
THE PROPER SIZE. DO NOT USE SUBSTITUTE
MATERIALS SUCH AS TEMPERED GLASS
OR DOUBLE THICKNESS WINDOW GLASS!
CONTACT THE STOVE MANUFACTURER FOR
REPLACEMENT GLASS.
Gasket and Glass cleaning products are available
at local retail home centers. Manufacturers of cleaning
products include, A.W. Perkins Co. (www.awperkins.
com) or Rutland Products (www.rutland.com).
After extensive use, the gasket material which
provides glass and door seal may lose it’s resiliency
and will need to be replaced. Inspect glass and door
gaskets periodically to ensure proper seal; if gaskets
become frayed or worn, replace immediately.
DOOR GASKET REPLACEMENT
CAUTION: DO NOT OPERATE A STOVE THAT IS
MISSING DOOR GASKET MATERIAL. OVER FIR-
ING AND UNSAFE OPERATING CONDITIONS
MAY RESULT.
PROCEDURE:
1.
Ensure appliance is not in operation and is thor-
oughly cooled.
2.
Remove old door gasket and clean channel.
3.
Using an approved, high temperature ga
t
e
k
s
cement, apply a thin coat in bottom of channel.
4.
Starting at hinge side of door, work gasket into
channel around door unit, end butt and trim to
length.
5.
Close door and allow three to four hours for cement
to set bef
QTGſring appliance.
SERVICE HINTS
...continued
22