Xerox 3150 - Phaser B/W Laser Printer User Manual - page 149

S

PECIFICATIONS

9.10

Labels

C

AUTIONS

: 

• To avoid damaging the printer, use only labels recommended for 

laser printers.

• To prevent serious jams, always use the Tray 1 to print labels 

and always use the rear output tray.

• Never print on the same sheet of labels more than once and 

never print on a partial sheet of labels.

When selecting labels, consider the quality of each component:

• Adhesives: The adhesive material should be stable at 205 °C 

(400 °F), the printer’s fusing temperature.

• Arrangement: Only use labels with no exposed backing 

between them. Labels can peel off sheets with spaces 

between the labels, causing serious jams.

• Curl: Prior to printing, labels must lie flat with no more than 

13 mm (.5 in.) of curl in any direction.

• Condition: Do not use labels with wrinkles, bubbles, or other 

indications of separation.

See “Printing on Labels” on page 3.17.

Transparencies

Transparencies used in the printer must be able to withstand 

170 °C (338 °F), the printer’s fusing temperature.

C

AUTION

: To avoid damaging the printer, use only transparencies 

recommended for use in laser printers.

See “Printing on Transparencies” on page 3.19.