Xerox 3150 - Phaser B/W Laser Printer User Manual - Printing On Labels
Other manuals for 3150 - Phaser B/W Laser Printer:
Setup Manual, Product Data Sheet, Networking Manual, User Manual, Specifications, Specifications, Service Manual
Manual is about: User Guide
of
152
U
SING
P
RINT
M
ATERIALS
3.17
3
Printing on Labels
1
Open the Tray 1 and the rear output tray.
2
Load labels with the print side up.
Guidelines
• Only use labels recommended for laser printers.
• Verify that the labels’ adhesive material can tolerate fusing
temperature of 205°C (400°F) for 0.1 second.
• Make sure that there is no exposed adhesive material
between the labels. Exposed areas can cause labels to peel
off during printing, which can cause paper jams. Exposed
adhesive can also cause damage to printer components.
• Do not feed a sheet of labels through the printer more than
once. The adhesive backing is designed for one pass through
the printer.
• Do not use labels that are separating from the backing sheet
or are wrinkled, bubbled, or otherwise damaged.