Xerox 3150 - Phaser B/W Laser Printer User Manual - Printing On Card Stock Or

U

SING

 P

RINT

 M

ATERIALS

3.21

3

Printing on Card Stock or 

Custom-sized Materials

Postcards, 3.5 by 5.83 in. (index) cards and other custom-sized 

materials can be printed with your printer. The minimum size is 

76 by 127 mm (3 by 5 in.) and the maximum size is 216 by 

356 mm (8.5 by 14 in.).

1

Open the Tray 1 and the rear output tray.

2

Load print material with print side up and short edge first.

Guidelines

• Always insert the short-edge into the Tray 1 first. If you want 

to print in landscape mode, make this selection through your 

software. Inserting paper long-edge first may cause a paper 

jam.

• Do not load more than 5 cards into the Tray 1 at a time.

• Do not print on media smaller than 76 mm (3 in.) wide or 127 

mm(5 in.) long.

• Set margins at least 6.4 mm (0.25 in.) away from the edges 

of the material in the software application