Xerox 6279 User Manual - page 114
Finishing
If a Finisher is attached to the machine:
1. Select the Finishing Override checkbox.
2. Select the Bypass button to override the finishing settings.
The Finishing screen displays.
3. Choose a Select Folder Program from those listed.
4. Select Bin choices.
5. Select the Title Block Location. This selection tells the machine how to fold the
document with the title block showing as indicated. Title blocks are found on
engineering drawings.
Remove Selected Jobs
This feature eliminates the job altogether from the Reprint queue. It is permanently
deleted. You must have System Administrator privileges to perform this task. If you are
not logged in as a System Administrator, the Remove Selected button is not present.
Perform the following:
1. Select Job Information from the Services menu.
2. Select the Reprint tab.
3. Select the job(s) you wish to delete.
4. Select the Remove Selected button.
NOTE
Jobs removed from the list located on the Reprint tab still appear on the
Job Information > All tab which is a job queue list. The removed jobs, however,
are no longer reprintable.
Job Reprint from Web Printer
Management Tool
To access the Web Printer Management Tool, go to your internet browser and enter the
IP address of the access controller or your designated printer.
There are multiple ways to bring jobs through the Web Printer Management Tool to
your remote printer. The first and primary way is done by connecting from a client
workstation or a printer driver. Refer to the Xerox FreeFlow Accxes V15.0 Drivers and
Client Tools Software Install Guide for detailed instructions.
The second choice, shown below, is done by browsing to and uploading a file. This may
be easier than installing a driver. However, you have to manually adjust the printer
settings (e.g., 5 copies vs. 1) prior to submission and then change them back. You are
also limited to file formats that FreeFlow Accxes can directly support.
Xerox
®
6279
®
Wide Format Solution
4-6
Copy/Scan User Guide
Job Information