Xerox 6279 User Manual - page 42

NOTE

When the Scanner detects the original, it will feed it a short distance and stop

briefly, then complete the scan automatically.

3. The scanner is equipped with Front Return Guides so that the original will exit toward

the front of the machine. You may wish to guide the lead edge of the original as it

travels toward you.

NOTE

Remove the Front Return Guides guides before copying an original that may

not flex and flow easily along them. This will prevent the guides from falling off

of the machine and getting damaged.

4. Make the required media settings on the User Interface and scan your original.

Refer to Chapter 3 

Copying Procedures

 for details on media source selections.

Loading Cut Sheet Media

1. Slowly pull out the Media Drawer towards you until it stops.

2. Load the paper in the tray below the Max Fill Line located on the back of the tray.

3. Squeeze the left and right Paper Guide Levers and adjust the guides to match the

size of your paper.

Xerox

®

 6279

®

 Wide Format Solution

1-32

Copy/Scan User Guide

Product Overview