Xerox 6279 User Manual - page 13
Table 1: System Components
Function
Component
No.
Also known as the UI, is contained of the Touch Screen
and the Control Panel. This is where the operator will
program jobs and configure the features of the 6279
Wide Format System.
User Interface
(consists of #2, 3)
1
Used to set up copy jobs, map originals to the installed
media, display messages and procedures, and provide
troubleshooting help, e.g., for jam clearance.
Touch screen
2
Contains selection buttons and copy/print services
access.
Control Panel
3
Helps the user align the edge of a document when
feeding it into the scanner.
Original Guide
4
The document glass area where images are scanned.
Scanner
5
Used for printing or copying on cut sheet media.
Manual Feed-in Shelf (Bypass)
6
The label used as a guide for aligning originals in the
center for scanning.
Size Indicator Label
7
A dual-roll media drawer that feeds roll paper.
Roll 1 and 2 Drawer
8
A dual-roll media drawer that feeds roll paper.
Roll 3 and 4 Drawer
9
Cut sheet media tray.
Tray 3 Drawer
10
Cut sheet media tray.
Tray 4 Drawer
11
Assists the original document as it exits the printer.
Turn Around Guide
12
Lift to open the Upper Unit of the printer and access
jammed media or to open the Waste Toner Bottle Door.
Upper Unit Release Lever
13
Power to the Printer and UI.
Printer Power Switch
14
Adjusts for paper thickness from 0-0.5 inch/0-12 mm
(increments of 2 mm).
Original Thickness Lever
15
Documents to be scanned are input here.
Scanner Feed-in Shelf
16
1-3
Xerox
®
6279
®
Wide Format Solution
Copy/Scan User Guide
Product Overview