Xerox C123 - Copycentre B/W Laser Supplementary Manual - Quick Scan to Ftp Setup
Quick Scan to FTP Setup
Xerox WorkCentre
®
Pro 123/128/133
8
Quick Scan to FTP Setup
Files can be scanned on the multifunction device and routed on to a server or a client using FTP protocol.
Directory structures (repositories) need to be created on the server to hold the scanned documents.
See also:
System Administrator Guide: Contains more detail concerning Scan to FTP setup.
User Guide: Contains information on how to set up templates and repositories.
Prerequisites for Scan to FTP
1.
Confirm that an existing operational network utilizing TCP/IP is available.
2.
FTP Server/Client exists and is running.
3.
Repository (folder) needs to be created on the FTP server to hold the scanned document.
4.
Confirm that the following ports are enabled:
a.
TCP/IP
b.
FTP Client
c.
SNMP
d.
SOAP
Data to Set Up Scan To FTP
Install
Requirement
Comments
Repositories need to be set
up on the FTP server.
Required
This is the location or path of the directory for saving
scanned documents.
Server IP Address
Required
This is the IP address of the FTP server.
FTP Login/password
information
Optional
This is required if the FTP server requires login/password
authentication. Most FTP servers require a login/password.
Kerberos IP Address
Optional
If Remote Authentication is required, then Kerberos needs to
be enabled.